← All articles

PPWR, Packaging Regulation (EU) 2025/40: dates and obligations

Regulatory status checked on

The PPWR, Regulation (EU) 2025/40 on packaging and packaging waste, applies from 12 August 2026 and replaces Directive 94/62/EC [1]. It is a regulation: it applies directly in every Member State, with no need for national transposing legislation. Some obligations are already in effect, such as the PFAS limit in food-contact packaging. The rest arrive in stages between 2028 and 2040, and many depend on Commission acts not yet adopted. This guide puts the dates in order.

What the PPWR is and who it applies to

The regulation is dated 19 December 2024 and was published in the Official Journal of the EU on 22 January 2025 [1]. It applies to all packaging placed on the Union market, whatever the material, and to all packaging waste.

The obligations fall on economic operators. Before placing packaging on the market, the manufacturer carries out the conformity assessment, draws up the technical documentation and completes an EU declaration of conformity (Art. 15) [1]. Importers, distributors and fillers also have specific obligations.

The timeline at a glance

Date What happens Article Status
12 August 2026 The regulation applies; food-contact packaging with PFAS above the limits is banned Art. 71, Art. 5 [1] Final
12 August 2028 (or later) Harmonised material label Art. 12 [1] Indicative: depends on an implementing act not yet adopted [4]
12 February 2029 (or later) Label on reusable packaging, with QR code Art. 12 [1] Indicative: depends on an implementing act not yet adopted [4]
1 January 2030 Recyclability grade A, B or C; minimum recycled content in plastic; maximum 50% empty space; ban on certain single-use formats; first reuse targets Arts. 6, 7, 24, 25, 29 [1] Final for banned formats and reuse; indicative for recyclability, recycled content and empty space, which depend on acts not yet adopted
1 January 2035 Recyclability “at scale” Art. 6 [1] Indicative: depends on an implementing act not yet adopted
1 January 2038 Only recyclability grades A or B Art. 6 [1] Final
1 January 2040 Higher recycled content; higher reuse targets Arts. 7, 29 [1] Final

Many dates carry the wording “or X months after the entry into force of the delegated or implementing acts, whichever is later” [1]. If the Commission adopts an act late, the obligation moves with it.

Dates not yet final. The deadlines marked as indicative depend on Commission acts that, as of 19 November 2026, have not been adopted. The first, on labelling, was due by 12 August 2026 and is now expected in the second quarter of 2027; you can follow its status on the Commission’s Have your say portal [4].

Proposal COM(2025) 982 (“Omnibus VIII”), under discussion, amends the PPWR but does not touch the dates in this table: it would suspend until 2035 the obligation for some producers to appoint an authorised representative for extended producer responsibility in other Member States. Parliament voted its amendments on 20 October 2026 and the text is now in negotiations with the Council [5].

PFAS in food-contact packaging

From 12 August 2026, food-contact packaging may not be placed on the market if it contains PFAS above these limits (Art. 5(5)) [1]:

  • 25 ppb for any individual PFAS measured by targeted analysis;
  • 250 ppb for the sum of PFAS measured by targeted analysis;
  • 50 ppm for total PFAS, polymeric PFAS included.

This is the first substantive obligation already in force. If you produce food, ask your packaging supplier for the documentation that proves it.

Recyclability

From 1 January 2030 all packaging must be recyclable (Art. 6) [1]. Recyclability is expressed in three performance grades, A, B and C, calculated using design-for-recycling criteria that the Commission sets through delegated acts [1]:

  • from 1 January 2030, or 24 months after the delegated acts if later, packaging outside grades A, B or C may not be placed on the market; the delegated acts are due by 1 January 2028 and, as of 19 November 2026, have not been adopted, so the date remains indicative;
  • from 1 January 2035 packaging must also be recycled “at scale”, meaning actually collected, sorted and recycled in sufficient quantities; this date too depends on an implementing act not yet adopted;
  • from 1 January 2038 only grades A and B remain allowed.

Recycled content in plastic

The plastic parts of packaging must contain a minimum share of post-consumer recycled plastic, calculated as an average per manufacturing plant and per year (Art. 7) [1].

Type of plastic packaging From 2030 From 2040
Contact-sensitive, made of PET (excluding beverage bottles) 30% 50%
Contact-sensitive, made of other plastics (excluding beverage bottles) 10% 25%
Single-use plastic beverage bottles 30% 65%
Other plastic packaging 35% 65%

Source: Art. 7(1) and (2) [1]. The 2030 date moves to three years after the implementing act on the calculation method, if that comes later [1]. As of 19 November 2026 that act has not yet been adopted: the 2030 date is therefore indicative.

Less packaging and banned formats

From 1 January 2030, fillers of grouped, transport or e-commerce packaging must keep to a maximum empty space ratio of 50% (Art. 24) [1]. Here too the date may slip if the implementing act on the calculation method is late.

From the same date the formats in Annex V are banned (Art. 25) [1]. These include:

  • single-use plastic grouped packaging used at the point of sale to bundle bottles, cans or jars;
  • single-use plastic packaging for less than 1.5 kg of fresh fruit and vegetables, with possible national exemptions;
  • single-use plastic packaging for food and beverages consumed on the premises of food service businesses;
  • single-use plastic portions of condiments, sauces, coffee creamer and sugar in food service, with exceptions for takeaway;
  • single-use toiletry bottles in hotels;
  • very lightweight plastic carrier bags, except for hygiene reasons or loose food.

Reuse

From 1 January 2030 the reuse targets kick in (Art. 29) [1]:

  • transport packaging (pallets, crates, boxes, drums and the like) used within the Union: at least 40% reusable, rising to a 70% target from 2040; cardboard boxes are excluded;
  • transport packaging between sites of the same company or to another operator in the same Member State: reusable;
  • box-shaped grouped packaging, cardboard excluded: at least 10%, 25% target from 2040;
  • beverages sold to consumers: the final distributor makes at least 10% available in reusable packaging, 40% target from 2040.

The beverage target does not apply to milk and dairy products, highly perishable beverages, most wine products and spirit drinks (Art. 29(7)) [1]. Points of sale up to 100 m² are exempt [1].

Harmonised labels and QR codes

The PPWR introduces the same label across the Union (Art. 12) [1]:

  • material label: pictograms that help consumers sort their waste, from 12 August 2028 or 24 months after the implementing acts, if later; it does not apply to transport packaging, except e-commerce packaging;
  • reuse label: from 12 February 2029 or 30 months after the implementing act; information on reuse and collection points is provided through a QR code or another open, standardised data carrier;
  • recycled content and bio-based plastic: if you state them on the label, from 12 August 2028 you must follow the harmonised specifications;
  • optional QR code: next to the label you can add a QR code showing where each component should go.

Digital information may not be mixed with marketing content, and must collect only the personal data that is necessary [1]. If another EU law already requires a data carrier on the product, such as a digital product passport, a single carrier is used for product and packaging, with the information kept distinguishable [1].

The regulation required the Commission to adopt the implementing acts on labelling by 12 August 2026 [1]. That did not happen: the Commission now expects to adopt them in the second quarter of 2027, an indicative date [4]. Since the obligation applies 24 months after the act enters into force, if that is later than 12 August 2028, the material label would not be mandatory before 2029. As of 19 November 2026, CONAI (the Italian packaging consortium) describes the European label as “being defined” and states that the Italian environmental label can be kept in its current form until 11 August 2028 [2]. Packaging manufactured or imported before the deadline may stay on sale for up to three years afterwards [1]. Today’s Italian rule is explained in Environmental labelling of packaging.

Environmental claims on packaging

You may claim a packaging property regulated by the PPWR, such as recyclability or recycled content, only if it goes beyond the minimum requirements of the regulation, and you must say whether the claim covers the unit, part of it or all your packaging (Art. 14) [1]. The evidence goes in the technical documentation. The general rules on claims are in Green claims and greenwashing.

What to do now

  • Ask your food-contact packaging suppliers for the PFAS documentation.
  • Take an inventory of your packaging: material, weight, components, supplier, destination.
  • Flag which formats fall under Annex V and plan alternatives before 2030.
  • Follow the Commission’s delegated and implementing acts: they set the real dates for recyclability and labelling [3].

How DPP helps

DPP keeps the data on products, batches, suppliers, documents and certifications in one platform, with a change history. For each batch it publishes a passport opened from a QR code, showing only the fields you decide to make public. When the PPWR implementing acts are published, DPP adapts to the data they require. See the features.

Frequently asked questions

Is the PPWR already in force?

Yes. It applies from 12 August 2026 [1]. Many obligations, however, have later dates, between 2028 and 2040.

Do wine and milk have to switch to reusable packaging?

The 2030 reuse target for beverages does not apply to milk and dairy products, most wine products and spirit drinks [1]. The targets for transport packaging still apply.

Is a QR code on packaging mandatory?

It is mandatory on reusable packaging, for reuse information. For other packaging it is optional, next to the harmonised label [1].

When does the European material label arrive?

From 12 August 2028, or 24 months after the Commission’s implementing acts if they come later [1]. The date is not final: the act has not yet been adopted and the Commission expects it in the second quarter of 2027, so the obligation would not apply before 2029 [4].

Sources

  1. Regulation (EU) 2025/40 on packaging and packaging waste (PPWR), EUR-Lex
  2. CONAI, Environmental labelling of packaging (notice on the transitional period)
  3. European Commission, Packaging waste
  4. European Commission, Have your say: implementing act on harmonised packaging labels (initiative 19243)
  5. European Parliament, Legislative Observatory, procedure 2025/0395(COD), Omnibus VIII (COM(2025) 982)