Environmental labelling of packaging has been mandatory in Italy since 1 January 2023 for all packaging placed on the market in the country [1]. The label must state the material using the coding of Decision 97/129/EC and, for packaging intended for consumers, how to sort it for separate collection [4]. The information can also be given through a QR code, an app or a website [3]. According to CONAI, the Italian packaging consortium, the label in its current form can be kept until 11 August 2028 [6]. After that comes the EU label under the PPWR, but its date is not yet final: it depends on a Commission act not yet adopted [8].
Where the obligation comes from
The rule is in Article 219(5) of Legislative Decree 152/2006, Italy’s Consolidated Environmental Act, as amended by Legislative Decree 116/2020 [1] [2]. It says two things [1]:
- all packaging must be labelled to make collection, reuse, recovery and recycling easier, and to inform consumers about the packaging’s final destination;
- producers must state the nature of the materials used, on the basis of Decision 97/129/EC.
Its application was postponed several times. The obligations have applied since 1 January 2023, and packaging already placed on the market or already labelled by that date may be sold until stocks run out [1].
Paragraph 5.1 of the same article provides for technical guidelines from the Ministry [1]. They were adopted with Ministerial Decree no. 360 of 28 September 2022, which replaced the earlier Ministerial Decree 114/2022 [3]. Breaches are punished with the administrative penalties set out in Article 261(3) of Legislative Decree 152/2006 [3].
What to put on the label
The mandatory content depends on who receives the packaging [4].
| Destination | Mandatory information |
|---|---|
| Household channel (end consumer, B2C) | Material coding under Decision 97/129/EC and separate collection instructions |
| Commercial and industrial channel (B2B) | Material coding under Decision 97/129/EC, passed along the whole supply chain |
Source: CONAI guide on digital channels [4].
Instructions for packaging sold to consumers must be in Italian, because the obligation concerns packaging placed on the market in Italy. You can add translations for foreign residents or tourists [4]. If you export, check the rules of the destination country: Italian collection instructions may not apply elsewhere [4].
The Decision 97/129/EC coding
Decision 97/129/EC sets numbers and abbreviations to identify packaging materials, split into seven annexes: plastics, paper and cardboard, metals, wood, textiles, glass and composites [5]. Each material has an abbreviation and a number. Some common examples:
- PET 1: polyethylene terephthalate, the plastic used for water bottles;
- PAP 20, 21, 22: corrugated cardboard, non-corrugated cardboard, paper;
- ALU 41: aluminium;
- GL 70: colourless glass.
For composite packaging, made of different materials that cannot be separated by hand, the decision provides its own codes [5].
One component at a time
The label covers every separable component. A wine bottle, for example, has a glass body, a closure, a capsule and a label: each element the consumer separates has its own material and its own collection stream. It is worth keeping a list of components, with code and collection stream, rather than rewriting the label for every product.
QR codes, apps and websites: the digital label
Ministerial Decree 360/2022 states that the mandatory information is provided “by technical means, including digital ones” (Art. 1(3)) [3]. The attached guidelines say that digital channels such as apps, QR codes and websites may always be used, and that they can fully replace or supplement the printed information [4].
Several combinations are possible [4]:
- fully digital: coding and collection instructions online only;
- partly digital: coding printed and collection online, or the other way round;
- fully printed, with digital used only for additional, voluntary information.
For B2B packaging you can also use transport documents, management systems or data exchange software with customers [4].
One condition always applies to the household channel: consumers must know how and where to find the information. You need a “bridge” between the packaging and the digital content, such as a sentence or an icon next to the QR code, or instructions at the point of sale [4]. A QR code with no explanation is not enough.
The PPWR is coming
Regulation (EU) 2025/40 on packaging, the PPWR, applies from 12 August 2026 [7]. It sets its own labelling rules, harmonised across the Union (Art. 12) [7]:
- a harmonised label with pictograms on material composition, mandatory from 12 August 2028 or 24 months after the Commission’s implementing acts enter into force, whichever is later;
- the implementing acts defining the label were due by 12 August 2026 but, as of 19 November 2026, have not been adopted: the Commission expects to adopt them in the second quarter of 2027 [8];
- in addition to the label, a QR code or other data carrier can be added with the destination of each component;
- if another EU law already requires a data carrier for the product, a single carrier is used for product and packaging;
- the information must be in the languages set by the Member State where the packaging is sold;
- packaging manufactured or imported before the deadline may remain on sale for up to three years afterwards.
As of 19 November 2026, CONAI describes the EU label as “being defined” and states that the Italian environmental label can be kept in its current form until 11 August 2028 [6]. This is the date given by CONAI, tied to the PPWR deadline: if that slips, it is worth checking for updates.
Date not yet final. 12 August 2028 only holds if the implementing act on the label enters into force by August 2026, which has not happened. The Commission expects to adopt it in the second quarter of 2027, an indicative date: the 24 months run from then, so the obligation would apply no earlier than 2029. You can follow the act’s status on the Commission’s Have your say portal [8].
For details on the new regulation, read PPWR, the packaging regulation (EU) 2025/40.
What to do now
- List the components of each package, with material code and collection stream.
- Separate packaging for consumers from packaging for business customers.
- If you go for a QR code, add a sentence explaining what it contains and make sure the page is in Italian.
- Don’t add phrases such as “eco-friendly packaging”: from 27 September 2026, generic environmental claims are banned unless substantiated. We cover this in Green claims and greenwashing.
How DPP helps
DPP gathers your product and batch data in one platform, documents included, and publishes a passport for each batch, opened from a QR code, in the language of whoever opens it. You decide, field by field, what is public. The features dedicated to environmental labelling are described on the Environmental label page.
Frequently asked questions
Is the environmental label mandatory for B2B packaging too?
Yes, but the material coding under Decision 97/129/EC is enough, and it can also travel in the documents or digital systems exchanged with the customer [4].
Can I put just a QR code on the packaging?
Yes: digital channels can fully replace the printed information. For consumers, though, you must clearly indicate how to access the information [4].
Does the label need translating for export?
The Italian obligation concerns packaging placed on the market in Italy, with instructions in Italian. Other countries have their own rules [4].
When will the label change?
With the PPWR’s harmonised label, from 12 August 2028 or 24 months after the implementing act, whichever is later [7]. The date is not yet final: the act has not been adopted and the Commission expects it in the second quarter of 2027 [8]. CONAI states that the current label can still be used until 11 August 2028 [6].
Sources
- Italian Legislative Decree no. 152 of 3 April 2006, art. 219 (current text), Normattiva
- Italian Legislative Decree no. 116 of 3 September 2020, Normattiva
- Italian Ministry for Ecological Transition, Ministerial Decree no. 360 of 28 September 2022 (guidelines on packaging labelling)
- CONAI, Guide to using digital channels for the environmental labelling of packaging
- Commission Decision 97/129/EC establishing the identification system for packaging materials, EUR-Lex
- CONAI, Environmental labelling of packaging (platform and notice on the transition period)
- Regulation (EU) 2025/40 on packaging and packaging waste (PPWR), EUR-Lex
- European Commission, Have your say: implementing act on harmonised packaging labels (initiative 19243)