← All articles

GS1 Digital Link and QR codes: from product to passport

Regulatory status checked on

GS1 Digital Link is the standard that turns a product’s GS1 codes, such as the GTIN, batch and serial number, into a web address. Put into a QR code, that address does two things at once: the checkout reads its GTIN just as it would from a barcode, and the customer’s smartphone opens a page, for example the digital product passport [1]. This guide shows how the address is built, what the “Sunrise 2027” goal involves and why any old QR code isn’t enough.

GS1 is the organisation that manages barcode standards (in Italy it is represented by GS1 Italy, which companies join to get their own codes [5]). Its best-known code is the GTIN (Global Trade Item Number), the number that identifies a trade item and that today sits under the bars of an EAN-13 [6].

GS1 Digital Link defines a standard way to write these identifiers, together with batch, serial number, expiry date and more, inside a web URI [1]. According to GS1, identifiers encoded this way remain readable by scanning software even offline, while also linking the product to online content [1].

The practical point, again according to GS1: the brand owner can update the content the code points to without changing the QR code printed on the packaging [1]. You don’t redo the artwork every time a piece of information changes.

The current version of the URI syntax is 1.7.0, ratified in August 2026 [2]; the standard for a conformant resolver is at version 1.2.1, also ratified in August 2026 [7]. These are the versions published by GS1 as of 19 November 2026: the standards are updated periodically.

The URI structure: GTIN, batch, serial

A GS1 Digital Link address is made up of a domain and “code/value” pairs. The codes are GS1 Application Identifiers (AIs): short numbers that say what type of data follows. Here are the examples taken from the standard [2]:

https://id.gs1.org/01/09520123456788
https://brand.example.com/01/09520123456788/10/ABC123
https://brand.example.com/01/09520123456788/21/12345
https://example.com/01/09520123456788/10/ABC1/21/12345?17=180426

How to read them:

Part Meaning Where it goes
01/09520123456788 GTIN, the primary identifier in the path
10/ABC123 batch/lot in the path
21/12345 serial number in the path
?17=180426 expiry date (YYMMDD) in the query string

The standard distinguishes three levels [2]:

  • Primary key: the base identifier, for example the GTIN.
  • Qualifiers: extensions that make the identifier more precise, such as batch and serial. They go in the path, in a fixed order: for the GTIN the rule is variant, then batch, then serial. /01/…/10/ABC123/21/12345XYZ is valid; /01/…/21/12345XYZ/10/ABC123 is not.
  • Attributes: descriptive data with no hierarchy, such as expiry date or weight. They go in the query string after the ?.

The domain doesn’t have to be GS1’s: the standard’s examples include both id.gs1.org and brand or retailer domains [2]. So you can use your own domain and decide where each scan leads.

Which level to choose

  • GTIN only: one page per product model. Fine for technical sheets and instructions.
  • GTIN + batch: one page per batch. This is the natural level for food: origin of raw materials, production dates, batch lab results.
  • GTIN + serial: one page per individual unit. Needed for products tracked one by one, such as some components or high-value items.

The finer the level, the more the code has to be generated and printed on the production line, with an operating cost to factor in.

Sunrise 2027: 2D codes at checkout

“Sunrise 2027” is the name given to the goal the industry has set with GS1: by the end of 2027, all retail point-of-sale systems should be able to read and process a defined set of GS1-standard 2D codes, in addition to existing linear barcodes [3].

Three things to note:

  1. It is an industry goal, not a law. GS1 itself says the transition is moving at different speeds in different countries [3].
  2. The linear barcode is not going away. The goal is about reading 2D codes “in addition to” existing codes [3].
  3. The permitted symbols are defined. The criteria GS1 publishes for printers and software list GS1 DataMatrix with the classic element string syntax, and QR Code and Data Matrix with GS1 Digital Link URI syntax [3].

For your company, this means a single QR code in GS1 Digital Link format can, over time, serve both the checkout and the customer. GS1 advises brand owners to assess now which 2D code to adopt based on their own use cases [3].

How it differs from any other QR code

An “ordinary” QR code contains any web address you like, for example https://yoursite.com/promo. It works for opening a page, but:

  • it doesn’t contain the GTIN in a standard form, so a checkout or a distributor’s system can’t tell which product it is;
  • it doesn’t distinguish batch and serial in a way other systems can interpret;
  • it depends on how you built your URLs: if you change website one day, codes already printed may lead to an empty page.

With GS1 Digital Link, the QR code carries the same identifiers used across the supply chain. GS1 stresses that retailers, partners and third-party apps can use the code as an entry point to look up their own information in their own systems, as they do with the barcode today [1].

The EU Ecodesign for Sustainable Products Regulation (ESPR) requires the digital product passport to be linked to a persistent unique identifier through a data carrier, physically present on the product, its packaging or the accompanying documents [4]. The regulation defines a data carrier as a linear barcode, a two-dimensional symbol or another identification medium readable by a device [4]. Among the data the passport may have to contain, the ESPR also mentions the GTIN under ISO/IEC 15459-6 [4].

The type of data carrier, its format and its placement, however, are set by the delegated acts for each product group [4]. For many products these acts have not been adopted yet: before printing, check what the one for your sector requires. The overall picture is on the ESPR and the digital passport page.

Where to start

  1. Check that you have GTINs. If you sell through large retail chains you probably already do; otherwise you get them by joining GS1 Italy [5].
  2. Decide the level: model, batch or serial.
  3. Choose the domain to use in the URI and who manages the redirects.
  4. Test printing on your real labels and scanning with several smartphones.
  5. Talk to your retail customers to find out when their checkouts will read 2D codes.

Frequently asked questions

Not for now. Sunrise 2027 is an industry goal, not a legal obligation, and it expects checkouts to read 2D codes in addition to existing linear ones [3]. During the transition it is normal to have both on the packaging.

Can I use my own domain instead of id.gs1.org?

Yes. The standard shows examples with brand and retailer domains [2]. What matters is that the structure after the domain follows the syntax.

The ESPR requires a data carrier linked to a unique identifier and leaves the choice of carrier and format to the delegated acts [4]. It doesn’t name GS1 Digital Link.

If I change the passport information, do I have to reprint the QR code?

No, as long as the QR code points to a stable address and the content is updated behind that address [1].

How DPP helps

DPP generates a public passport for each batch, opened from a QR code and translated into the reader’s language. With the GS1 Digital Link add-on, the QR code uses the standard format with GTIN and batch. See the features or pricing.

Sources

  1. GS1, GS1 Digital Link (standard page)
  2. GS1, GS1 Digital Link Standard: URI Syntax
  3. GS1, Global Migration to 2D in Retail (Ambition 2027)
  4. Regulation (EU) 2024/1781 (ESPR), text on EUR-Lex
  5. GS1 Italy, GS1 codes and GS1 Digital Link
  6. GS1, Global Trade Item Number (GTIN)
  7. GS1, GS1-Conformant Resolver Standard