The EU digital product passport registry is the Commission database in which whoever places a product on the market registers the identifiers of its digital product passport. It is provided for by Article 13 of ESPR, which set 19 July 2026 as the deadline [1]. The Commission gives 20 July 2026 as the date the registry became operational, and its operating rules are in Implementing Regulation (EU) 2026/1778 [2] [3]. The registry does not hold the passport: it holds the data needed to find it and check it.
What ESPR Article 13 says
Article 13 requires the Commission to set up, by 19 July 2026, a digital registry “storing in a secure manner at least the unique identifiers” (Art. 13(1)) [1]. In addition:
- for imported products, meaning those placed under the customs procedure of release for free circulation, the registry also stores the commodity code;
- the registry stores the unique identifiers of batteries subject to the passport under the Batteries Regulation;
- each delegated act can add further data to be stored, weighing the authenticity of the passport, its usefulness for checks and the burden on businesses (Art. 13(2)) [1].
The regulation explains why in its recitals. The passport is a decentralised system run by economic operators; authorities, however, need a list of all the identifiers of products on the market (recital 41) [1].
Registry and passport: two different things
| Digital product passport | EU registry | |
|---|---|---|
| Who runs it | The economic operator or a digital product passport service provider | The European Commission |
| What it contains | All the data required by the delegated act | At least the unique identifiers, the commodity code for imported products, the additional data set by the delegated act |
| Who consults it | Customers, operators, repairers, recyclers, authorities, according to access rights | The Commission, national competent authorities and customs authorities |
Sources: ESPR, Arts. 11 and 13 [1]; European Commission [3].
The Commission confirms it: the full content of the passport stays with the economic operator or its service provider [3].
Who must register and how
Data is uploaded to the registry by the economic operator placing the product on the market or putting it into service (Art. 13(4)) [1]. Implementing Regulation 2026/1778 sets out the procedure [2]:
- Identity verification. Only a “verified economic operator” can register. A legal person established in the Union is verified with a qualified electronic seal or a qualified electronic attestation of attributes, under the eIDAS regulation (Art. 4). Verified status lasts until the identification means expires, and at most three years.
- Two channels. Registration is done through the registry’s web interface or via API (Art. 8(6)). The API is for those registering many products from their own management system.
- Automatic checks. At registration the Commission reads the passport and checks, among other things, the semantic conformity of the data, the level of granularity (model, batch or item), the validity of the commodity code and the link to the backup copy (Art. 8(7)).
- Registration identifier. If the checks pass, the registry generates a unique registration identifier and sends it to the operator (Art. 8(8)–(10)).
- Proof of registration. The operator can download a proof, signed with the Commission’s qualified electronic seal and time-stamped, which contains among other things the product identifier and a hash of the registered passport version (Art. 9).
- Delegated third parties. An operator can authorise a third party to register on its behalf; the third party must be verified and the operator remains fully responsible (Art. 19(4)).
ESPR adds an important point: being given the registration identifier is not proof of compliance with the regulation (Art. 13(5)) [1]. Registering does not mean you are compliant.
What it means for customs
The registry is also a tool for border checks. ESPR Article 15 requires anyone importing a product covered by a delegated act to provide customs with the unique registration identifier [1]. Customs may release the product for free circulation only after verifying that the registration identifier and commodity code match the data in the registry (Art. 15(2)) [1].
The timing is staggered:
- the obligation to provide the identifier to customs applies from when the registry is operational (Art. 15(1)) [1];
- electronic, automated verification goes through the interconnection with the EU Single Window Environment for Customs (EU CSW-CERTEX), which must be operational within four years of the entry into force of the implementing act on the registry (Art. 15(3)) [1]. Regulation 2026/1778 was published on 17 July 2026 and enters into force on the twentieth day after publication [2], so the deadline falls in August 2030.
Customs and the Commission may also use passport and registry data for risk management and checks (Art. 15(4)) [1].
What it means for your company today
The registry exists, but whether you must register depends on the product. For ESPR products the obligation starts when the delegated act for your group applies, which also sets the level at which to register (Art. 8(1) of Reg. 2026/1778) [2]. The registry also accepts passports required by other EU laws: batteries, construction products, toys, detergents (Art. 1) [2]. For batteries the passport is mandatory from 18 February 2027 (Regulation (EU) 2023/1542, Art. 77) [5].
In the meantime the Commission has published documentation for operators: a registry user guide (updated in September 2026), an API integration guide, the OpenAPI specifications and a guide to semantic data (October 2026) [4]. The same page warns that some test features are being made available gradually.
Three things to do now:
- Get a qualified electronic seal, or check that you have one: you need it to be accredited.
- Decide who will register: your company or a delegated service provider. The responsibility stays with you.
- Check the commodity codes of the products you import: the registry compares them with those declared to customs.
To understand what the passport itself contains, read What is a digital product passport; for identifiers, Unique product identifier in the DPP.
How DPP helps
DPP prepares and publishes the passport: it collects data on products, batches, sites and partners, generates for each batch a public page opened from a QR code, and records the fingerprint of the data on the blockchain DAC. DPP does not register passports in the EU registry: it gives you tidy data and a ready passport, and adapts to the delegated acts as they come out. Discover the technology.
Frequently asked questions
Does the EU registry hold all my product data?
No. It stores at least the unique identifiers, the commodity code for imported products and the additional data set by the delegated act. The full passport stays with you or your service provider [1] [3].
Do I need to register now?
Only if your product is subject to a passport that already applies. For ESPR products the obligation comes with the delegated act for your group [1] [2].
Who can consult the registry?
The Commission, national competent authorities and customs authorities, for their tasks (Art. 13(6)) [1].
Does registration prove the product is compliant?
No. ESPR states expressly that the registration identifier is not proof of compliance [1].
Sources
- Regulation (EU) 2024/1781 (ESPR), text on EUR-Lex
- Commission Implementing Regulation (EU) 2026/1778 on the implementing arrangements for the digital product passport registry, EUR-Lex
- European Commission, Digital Product Passport
- European Commission, DPP: Resources & documentation (registry guides)
- Regulation (EU) 2023/1542 concerning batteries, text on EUR-Lex