The ESPR timeline has no single date: Regulation (EU) 2024/1781 has been in force since 18 July 2024, but the concrete obligations, including the digital product passport, arrive one product group at a time, with a delegated act for each [1]. As of 19 November 2026, the Commission’s working plan names iron and steel, aluminium, textiles, furniture, tyres and mattresses as the first groups [2]. Here you will find the indicative dates, who is affected and the only ESPR deadline already in force for businesses: the ban on destroying unsold clothing and footwear.
How the ESPR timeline works
The ESPR is a framework regulation. It sets the general rules and tasks the Commission with defining the requirements for each product group through delegated acts (Art. 4) [1]. Each delegated act sets the performance requirements, the information requirements and, where applicable, the digital product passport (Art. 9) [1].
Three rules determine the timing:
- No delegated act before 19 July 2025. The first one could not enter into force before that date (Art. 4(7)) [1].
- At least 18 months’ notice. A delegated act cannot start to apply earlier than 18 months after it enters into force, except in duly justified cases (Art. 4(4)) [1]. The regulation also asks for the needs of SMEs to be taken into account.
- Adoption and obligation are two different dates. The year the Commission adopts the act is not the year you need to comply: the obligation comes after the transition period.
The 2025–2030 working plan
The ESPR required the Commission to adopt the first working plan by 19 April 2025 and to prioritise a list of groups: iron and steel, aluminium, textiles (in particular garments and footwear), furniture including mattresses, tyres, detergents, paints, lubricants, chemicals, energy-related products, and ICT and electronic products (Art. 18(5)) [1].
The Commission published the plan on 16 April 2025, in communication COM(2025) 187 [2]. The plan covers 2025–2030, with a mid-term review in 2028. These are the indicative adoption dates for the delegated acts:
| Product group | Type | Indicative adoption in the plan |
|---|---|---|
| Iron and steel | Intermediate product | 2026 |
| Aluminium | Intermediate product | 2027 |
| Textiles and apparel | Final product | 2027 |
| Tyres | Final product | 2027 |
| Furniture | Final product | 2028 |
| Mattresses | Final product | 2029 |
| Repairability, including the score | Horizontal requirement | 2027 |
| Recycled content and recyclability of electrical and electronic equipment | Horizontal requirement | 2029 |
Status: all indicative. These are dates from a working plan, not fixed by any act. Source: COM(2025) 187 [2].
Some groups listed in Article 18 were left out of the first plan, with a reason given [2]:
- Detergents, paints and lubricants: impact and improvement potential judged lower than for the products chosen.
- Footwear: treated as a category separate from textiles; the Commission plans a study to be completed by the end of 2027 (indicative date).
- Chemicals: a very complex group; the Commission planned to launch a study by the end of 2025 to define its scope.
Energy-related products, already regulated under the old Ecodesign Directive, move progressively under the ESPR, with adoption dates spread between 2026 and 2030 [2].
The Commission’s updated timeline
The Commission’s digital product passport page gives a more recent indicative timeline, which the Commission itself says is subject to change [3]:
- Q4 2026: delegated act on iron and steel;
- Q3–Q4 2027: delegated acts on textiles, aluminium and tyres;
- 2028: furniture;
- 2029: mattresses and recycled content.
Compared with the April 2025 plan, the dates stay in the same years. Given the minimum 18-month lead time, for an act adopted at the end of 2027 the obligation would not, as a rule, arrive before 2029. This is an estimate derived from Article 4: the real date is written in each delegated act.
Date not yet final. All these dates are indicative: they come from a Commission timeline, not from an act, and may slip. As of 19 November 2026 the Commission’s page still gives the act on iron and steel as expected in the fourth quarter of 2026; you can follow developments on the same page [3].
Who needs to comply
The ESPR applies to any physical good placed on the market or put into service in the Union, including components and intermediate products (Art. 1(2)), whether made in the EU or imported (recital 44) [1]. The obligations fall on economic operators: manufacturer, authorised representative, importer, distributor, dealer and fulfilment service provider (Art. 2) [1].
Excluded, among others, are food and feed, medicinal and veterinary medicinal products, live plants, animals and micro-organisms (Art. 1(2)) [1]. If you produce cheese, olive oil or wine, the ESPR doesn’t concern you for the food product.
Watch out for intermediate products. The working plan points out that regulating steel and aluminium can affect every final product that contains them, and it also considers bringing some final products within the scope of the acts on intermediate products [2]. If you buy steel or aluminium, your suppliers may ask you for, or give you, new data sooner than expected.
Batteries follow their own regulation: from 18 February 2027 a passport is mandatory for batteries for light means of transport, industrial batteries above 2 kWh and electric vehicle batteries (Reg. (EU) 2023/1542, Art. 77) [5].
A note on the changes under way. The Omnibus IV proposal, COM(2025) 504, amends some provisions of the ESPR and of the Batteries Regulation (the manufacturer’s digital contact, documentation in electronic format), but in the text proposed by the Commission it moves neither the battery passport date nor the other dates in this article [7]. As of 19 November 2026 Parliament and Council have reached a provisional agreement and Parliament’s final vote is scheduled, but the regulation has not yet been adopted [6].
The ban on destroying unsold textiles
This part of the ESPR does not depend on product delegated acts and is already in force.
- From 19 July 2026, destroying the unsold consumer products listed in Annex VII is prohibited (Art. 25(1)) [1]. The annex covers clothing and clothing accessories (including leather), hats and headgear, and footwear, identified by Combined Nomenclature codes [1].
- Medium-sized enterprises: the ban applies from 19 July 2030 [1].
- Micro and small enterprises: exempt, but anyone not subject to the ban may not destroy unsold goods supplied to them to get around it (Art. 25(2)) [1].
The derogations are set out in Delegated Regulation (EU) 2026/296, adopted on 9 February 2026 and applicable from 19 July 2026 [4]. There are ten cases, including hazardous products, damaged or contaminated products, defects that cannot be repaired, infringements of intellectual property rights, and products offered for donation to at least three social economy entities without anyone accepting them (Art. 2) [4]. Anyone relying on a derogation must keep the documentation for five years from the destruction and provide it to the authorities within 30 days of a request (Art. 3) [4].
There is also a transparency obligation. Anyone who discards unsold consumer products publishes every year, on a page of its website, the number and weight of the products, the reasons, the destination (reuse, recycling, recovery, disposal) and the measures taken to prevent destruction (Art. 24) [1]. Here too micro and small enterprises are exempt, and medium-sized ones come in from 19 July 2030 [1].
What to do now
- Check whether your product falls within one of the priority groups, including as a component.
- Follow the Commission’s consultations on your group: delegated acts go through preparatory studies and consultations before adoption.
- Get the data you will probably need in order: materials, suppliers, production sites, batches, certifications.
- If you are in textiles, check how you handle unsold goods and how you document any derogations, now.
For the definition and content of the passport, read What is a digital product passport. A summary of the regulation is on the ESPR page.
How DPP helps
DPP lets you gather product, batch, site, partner, processing and certification data in one platform, including by importing it from Excel or from your ERP via API. For each batch it publishes a passport opened from a QR code, with the fields you choose to make public. When the delegated act for your group is published, DPP adapts to the data it requires. See pricing.
Frequently asked questions
When does the digital passport become mandatory for textiles?
There is no date fixed by any act yet. The Commission expects to adopt the textiles delegated act in Q3–Q4 2027, but this is an indicative date [3]; the obligation will follow after the transition period, as a rule at least 18 months [1].
Does the destruction ban apply to SMEs?
Micro and small enterprises are exempt. Medium-sized enterprises are covered from 19 July 2030; large ones from 19 July 2026 [1].
Are the working plan dates binding?
No. They are indicative and may change. The binding obligation only arises with the delegated act published in the Official Journal [2] [3].
Does the ESPR concern companies importing products from outside the EU?
Yes. It applies to all products placed on the EU market, including imported ones, and the importer is one of the economic operators with obligations [1].
Sources
- Regulation (EU) 2024/1781 (ESPR), text on EUR-Lex
- European Commission, Ecodesign and Energy Labelling Working Plan 2025-2030, COM(2025) 187
- European Commission, Digital Product Passport (indicative timeline)
- Commission Delegated Regulation (EU) 2026/296, derogations from the prohibition on destroying unsold consumer products, EUR-Lex
- Regulation (EU) 2023/1542 concerning batteries, text on EUR-Lex
- European Parliament, Legislative Observatory, procedure 2025/0134(COD) (Omnibus IV, digitalisation and common specifications)
- European Commission, proposal for a regulation COM(2025) 504 (Omnibus IV), EUR-Lex