The battery passport is mandatory from 18 February 2027 for three categories: light means of transport (LMT) batteries, industrial batteries with a capacity above 2 kWh and electric vehicle batteries, when they are placed on the market or put into service in the Union [1]. The date is set in Article 77 of Regulation (EU) 2023/1542 and, as of 19 November 2026, it has not been postponed [1][2]; the regulation is, however, the subject of an amending proposal still under discussion, COM(2025) 981 [6]. Below: who prepares the passport, what data it holds, how the QR code works and where the omnibus stands.
Which batteries need a passport
To check whether your battery is in scope, start from the regulation’s definitions [1].
| Category | Definition in the regulation (summary) | Passport from 18/2/2027 |
|---|---|---|
| Light means of transport (LMT) battery | Sealed, up to 25 kg, designed to power wheeled electric or pedal-assisted vehicles such as e-bikes, e-scooters and category L vehicles | Yes |
| Electric vehicle battery | Designed to power hybrid or electric vehicles of category M, N, O, or category L if it weighs more than 25 kg | Yes |
| Industrial battery | Designed for industrial uses, or any other battery over 5 kg that is not an EV, LMT or automotive battery | Yes, if capacity exceeds 2 kWh |
| Other batteries (portable, automotive) | — | No passport, but a QR code with other information |
On its battery passport page, the European Commission gives as examples batteries for electric vehicles, for e-bikes, e-mopeds and e-scooters, home storage batteries and industrial batteries [2].
Note: from 18 February 2027 all batteries must carry a QR code, not only those with a passport. For the three categories above, the QR opens the passport; for the others it leads to the labelling information, the EU declaration of conformity and information on waste batteries [1].
Who is responsible for the passport
Responsibility lies with the economic operator placing the battery on the market. It must ensure that the passport information is “accurate, complete and up to date” [1]. It can give written authorisation to another operator to act on its behalf, for example a service provider or the cell manufacturer, but the original responsibility stays with it [1].
The regulation follows the battery throughout its life [1]:
- if the battery is prepared for re-use, remanufactured or repurposed (its so-called “second life”), responsibility passes to the operator placing it back on the market. The battery gets a new passport, linked to the original one;
- when the battery becomes waste, responsibility passes to the producer, the producer responsibility organisation or the selected waste management operator;
- the passport ceases to exist once the battery has been recycled.
If your company assembles battery packs from purchased cells, you are likely the one placing them on the market. In that case the passport is yours, and your cell suppliers’ data becomes data you need to collect.
What data the passport contains
Annex XIII lists the contents and splits them into four access levels [1]. Information is included “to the extent applicable” to the battery category [1].
1. Public information on the battery model, accessible to anyone. This includes [1]:
- the general label information: manufacturer, category, place and date of manufacture, weight, capacity;
- material composition: chemistry, hazardous substances, critical raw materials;
- carbon footprint;
- responsible sourcing information, from the due diligence report;
- recycled content and share of renewable content;
- rated capacity, voltages, power, expected lifetime in cycles, temperature range, commercial warranty, efficiency, internal resistance;
- the EU declaration of conformity and information on waste prevention and management.
2. Model information for persons with a legitimate interest and for the Commission: detailed composition of cathode, anode and electrolyte, part numbers and contact details of spare-part suppliers, dismantling instructions (exploded diagrams, sequences, tools), safety measures [1].
3. Information for notified bodies, market surveillance authorities and the Commission: the test results that prove conformity [1].
4. Data on the individual battery for persons with a legitimate interest: performance and durability parameters, state of health, battery status (“original”, “repurposed”, “remanufactured”, “waste” and others), usage data such as charge and discharge cycles and negative events [1].
Legitimate interest covers, for example, repairers, remanufacturers, second-life operators and recyclers, who need that data to do their work [1]. Exactly who they are and what they can access is to be set by an implementing act, which the regulation scheduled for 18 August 2026 [1]. In the Commission’s timeline, the act on access rights for batteries appears with the indicative date “Q4 2026” [3]. The Commission has also published a document with the data points per battery category, clarifying which data are public and which are restricted [2].
The QR code and the unique identifier
The passport is opened from a QR code affixed to the battery, high-contrast and readable with an ordinary smartphone [1]. The QR points to a unique identifier that the economic operator assigns to the battery [1]. Both the QR code and the identifier must comply with the ISO/IEC 15459 series or equivalent standards [1].
The data, the regulation says, must be based on open standards, in an interoperable, machine-readable, structured and searchable format, “without vendor lock-in” [1]. The model is decentralised: the detailed data stays with the responsible economic operator [2]. For more on how an identifier is built, read our guide to the unique product identifier.
Omnibus and postponements: what has really changed
There has been a lot of talk about postponements in recent months. Here are the facts, one by one.
- Due diligence: postponed. Regulation (EU) 2025/1561 moved the application of the supply-chain due diligence obligations from 18 August 2025 to 18 August 2027 [4].
- Omnibus VIII: on 10 December 2025 the Commission proposed amendments to the Batteries Regulation (COM(2025) 981) [5]. Among the points listed by the European Parliament: a new definition of producer for distance sales, a definition of substances of very high concern for labelling, and exclusion of LMT battery packs from the removability and replaceability requirements [5]. As of 19 November 2026 the procedure file does not yet record the ENVI committee vote and gives 14 December 2026 for the plenary vote, as an indicative date only [6]. The Council already has its negotiating position, which among other things postpones the removability and replaceability requirements for some product categories [5]. The amendments described do not include a postponement of the passport date [5].
- Passport: the 18 February 2027 date remains the one in Article 77 [1], and it is the date the Commission gives on its page, noting that the timeline dates are indicative [2].
In practice: plan your work around 18 February 2027 and follow the omnibus, but do not count on a postponement that no text provides for today.
Date not yet final. 18 February 2027 is set by Article 77 of Regulation (EU) 2023/1542 and no text postpones it today, but proposal COM(2025) 981, which amends the same regulation, is still under discussion between Parliament and Council, and the negotiations could also touch the deadlines. You can follow its progress on the procedure file 2025/0397(COD) [6].
What to do now
Less than three months to go. A minimum plan:
- Check the category of each model: LMT, EV, industrial above or below 2 kWh.
- Establish who places each battery on the market and whether you need a written authorisation for another operator.
- Map the Annex XIII data: what you already have (technical sheets, declaration of conformity), what you need to ask suppliers for (composition, recycled content), what comes from the field (state of health, cycles).
- Assign the access levels: public, legitimate interest, authorities.
- Prepare the QR code and identifier according to ISO/IEC 15459 and decide where to place them on the battery.
How DPP helps
DPP has a battery profile with the Annex XIII fields: you enter the data, also from Excel or via API from your management system with the Enterprise package, and every field starts out private until you decide to publish it. The public passport opens from a QR code, including in GS1 Digital Link format, and the fingerprint of the data is recorded on the blockchain DAC. DPP keeps pace with the implementing acts as they come out. Details at /en/battery-passport and /en/pricing.
Frequently asked questions
When does the battery passport become mandatory?
From 18 February 2027, for LMT batteries, industrial batteries over 2 kWh and electric vehicle batteries placed on the market or put into service from that date [1]. The date is set by the regulation; the amending proposal under discussion, in its content known as of 19 November 2026, does not postpone it [5][6].
Does the passport also apply to batteries sold before 2027?
The obligation covers batteries placed on the market or put into service from 18 February 2027 [1]. However, a remanufactured or repurposed battery gets a new passport when it is placed back on the market [1].
Has the omnibus postponed the battery passport?
No. As of 19 November 2026 the omnibus proposal is still under discussion, with the plenary vote provisionally indicated for 14 December 2026 [6], and among the amendments described by the European Parliament there is no postponement of the passport [5]. Until the procedure is closed, the text can still change. What was postponed to 18 August 2027 is due diligence, through a separate regulation [4].
Is all passport data public?
No. Annex XIII provides for public data, data for persons with a legitimate interest and data for authorities only [1]. The state of health of an individual battery, for example, is restricted to persons with a legitimate interest [1].
Sources
- Regulation (EU) 2023/1542 concerning batteries and waste batteries, text on EUR-Lex
- European Commission, Digital Product Passport: Batteries
- European Commission, Digital Product Passport (indicative timeline)
- Regulation (EU) 2025/1561, postponement of the due diligence obligations, text on EUR-Lex
- European Parliament, Legislative Train: Omnibus VIII (industrial emissions reporting, batteries)
- European Parliament, Legislative Observatory: procedure 2025/0397(COD), COM(2025) 981